Measure piles, bins, or trenches with confidence today. Adjust for bulking, compaction, and density easily. Download clean summaries to support audits and tendering work.
| # | Shape | Dimensions | Count | Bulking | Compaction | Density | Adjusted Volume | Estimated Mass |
|---|---|---|---|---|---|---|---|---|
| 1 | Rectangular | 8 m × 3 m × 1.5 m | 1 | 1.10 | 1.00 | 250 kg/m³ | 39.60 m³ | 9.90 t |
| 2 | Cylindrical | Diameter 2.4 m, Height 1.8 m | 2 | 1.15 | 0.95 | 180 kg/m³ | 23.53 m³ | 4.24 t |
| 3 | Triangular prism | Length 12 m, Base 2.5 m, Height 1.2 m | 1 | 1.20 | 1.00 | 300 kg/m³ | 21.60 m³ | 6.48 t |
| 4 | Rectangular | 10 ft × 6 ft × 3 ft | 3 | 1.05 | 1.00 | 12 lb/ft³ | 16.07 m³ | 3.09 t |
| 5 | Cylindrical | Diameter 6 ft, Height 4 ft | 1 | 1.10 | 0.90 | 15 lb/ft³ | 6.46 m³ | 1.55 t |
Accurate volume estimation supports container sizing, haul scheduling, and landfill booking. When measured stockpiles are translated into standard units, planners can forecast truck trips, allocate loaders and labor, and avoid queueing at transfer stations. On tight sites, reliable estimates also help stage skips, protect access routes, and reduce rehandling that inflates costs.
The calculator provides rectangular, cylindrical, and triangular prism options to match common waste profiles. Rectangular works for bins, bays, and boxed storage areas. Cylindrical fits round heaps formed by radial tipping. Triangular prism suits windrows and trench spoil with sloped faces. Choose the shape that best represents the footprint and cross section at the time of measurement.
Bulking factor represents loosened material occupying more space after excavation, screening, or manual sorting. Compaction factor reflects densification during stacking, vehicle loading, and temporary storage under traffic. Factors vary with moisture content, particle grading, and equipment type, so use project-specific observations when possible. Document the chosen factors in reports to keep later comparisons consistent across phases.
Mass estimates strengthen budgeting and reporting because many contracts and permits track waste by weight. Enter a representative density from supplier data, waste audits, or field sampling. For mixed waste streams, use a weighted average based on composition. The tool converts entered units into a consistent basis, then outputs tonnes and US tons alongside adjusted volumes for logistics decisions.
Exported summaries create an audit-ready record of assumptions, inputs, and calculated totals. Use adjusted volume for transport planning, disposal booking, and temporary storage capacity checks. Use raw volume for physical space verification and quick field comparisons. Apply consistent rounding, add notes about measurement timing, and keep screenshots or survey logs so reviewers can replicate results during invoice validation. These practices improve transparency during client reviews and regulatory inspections. They reduce disputes over truck counts and records.
Raw volume is the geometric volume from measured dimensions and count. Adjusted volume applies bulking and compaction factors to better represent handled, loaded, or stored waste conditions.
Pick the closest practical geometry. For mixed shapes, split the pile into sections, calculate each volume separately, and sum the totals to reduce error.
Use site experience, past job records, and how the waste is handled. Loose, recently disturbed material often needs higher bulking, while repeated loading or traffic increases compaction.
Use waste audit reports, supplier or landfill guidance, or sample-and-weigh measurements on site. For mixed waste, estimate a weighted average based on composition.
Yes. Compare the adjusted volume to the container’s rated capacity. Keep a safety margin because voids, bridging, and moisture can change field packing behavior.
Multiple units help teams align with contracts, haulage tickets, and reporting templates. The calculator converts internally, then displays m³, ft³, and yd³ for quick comparison.
Important Note: All the Calculators listed in this site are for educational purpose only and we do not guarentee the accuracy of results. Please do consult with other sources as well.