Estimate carpet shampoo solution with practical inputs. Review dilution, batch size, and usage. Build accurate mixes for consistent carpet cleaning sessions.
| Area | Rate | Passes | Ratio | Loss | Ready Mix | Concentrate | Water |
|---|---|---|---|---|---|---|---|
| 120 m² | 120 ml/m² | 1 | 1:24 | 8% | 15.55 L | 0.62 L | 14.93 L |
| 85 m² | 140 ml/m² | 2 | 1:20 | 10% | 26.18 L | 1.25 L | 24.94 L |
| 1000 ft² | 110 ml/m² | 1 | 1:16 | 5% | 10.72 L | 0.63 L | 10.09 L |
Area in m² = Area × conversion factor
Base ready solution (L) = (Area in m² × application rate × passes) ÷ 1000
Total ready solution (L) = Base ready solution × (1 + loss percentage ÷ 100)
Total parts = Concentrate parts + water parts
Concentrate needed (L) = Total ready solution × (Concentrate parts ÷ total parts)
Water needed (L) = Total ready solution × (Water parts ÷ total parts)
Full tanks needed = Ceiling(Total ready solution ÷ tank size)
Concentrate per tank (L) = Tank size × (Concentrate parts ÷ total parts)
Water per tank (L) = Tank size × (Water parts ÷ total parts)
This calculator estimates ready-to-use cleaning solution for carpet shampoo jobs. It helps plan concentrate volume, water volume, tank batches, and a simple material cost estimate. The layout stays practical for field use and fast rechecking before each refill.
It is useful when cleaning rooms with different sizes, repeated passes, or varying dilution rules from product labels. The result section appears above the form after submission so the operator can review mix values first, then return to edit inputs if needed.
The graph section turns the batch result into quick visuals. A pie chart compares concentrate and water. A bar chart shows the amount of concentrate and water needed per full tank, which helps reduce mixing mistakes during repeated refills.
It estimates total ready solution, concentrate volume, water volume, full tank count, per tank mix amounts, wastewater allowance, and an optional concentrate cost for carpet shampoo work.
The application rate is entered in milliliters per square meter. Converting all area values to one base unit keeps the formula consistent and avoids mismatched unit errors.
A ratio of 1:24 means one part concentrate and twenty-four parts water. The calculator adds the parts, then splits the ready solution across those proportions.
Loss allowance covers practical waste such as hose hold-up, priming, spills, overspray, and leftover solution. Adding it helps avoid under-mixing during real cleaning jobs.
Tank count helps plan refills and staging. The calculator rounds up because a partial remaining batch still requires another filling cycle to finish the job.
Yes. You can enter tank size in gallons. The internal calculation converts values to liters, then shows main outputs in liters and gallons for convenience.
It multiplies the required concentrate volume by your entered cost rate. This gives a quick material estimate for planning jobs, quotes, or refill budgeting.
No. Product labels, machine efficiency, carpet condition, and operator method can change real usage. Use the result as a planning estimate, then verify with product instructions.
Important Note: All the Calculators listed in this site are for educational purpose only and we do not guarentee the accuracy of results. Please do consult with other sources as well.