Calculator
Example Data Table
| Inch Pounds | Formula | Foot Pounds |
|---|---|---|
| 12 in-lb | 12 ÷ 12 | 1 ft-lb |
| 24 in-lb | 24 ÷ 12 | 2 ft-lb |
| 60 in-lb | 60 ÷ 12 | 5 ft-lb |
| 120 in-lb | 120 ÷ 12 | 10 ft-lb |
| 180 in-lb | 180 ÷ 12 | 15 ft-lb |
| 240 in-lb | 240 ÷ 12 | 20 ft-lb |
Formula Used
Foot pounds = Inch pounds ÷ 12
Inch pounds = Foot pounds × 12
One foot has twelve inches. Torque uses force multiplied by distance. Therefore, twelve inch pounds equal one foot pound.
How to Use This Calculator
- Enter the torque value in the input field.
- Choose the conversion direction.
- Select decimal places and rounding mode.
- Add a target foot pound value if comparison is needed.
- Paste batch values when many conversions are required.
- Press calculate to view the result above the form.
- Use CSV or PDF export buttons to save the report.
Inch Pound to Foot Pound Conversion Guide
Why This Conversion Matters
Inch pound and foot pound values both describe torque. They measure turning force around a pivot. Many mechanics, builders, engineers, and tool users see both units on manuals. A small error can affect bolt preload. It can also change how a part performs. This calculator helps you convert values fast, while keeping the math visible.
Core Relationship
The main relationship is simple. One foot contains twelve inches. Since torque uses force multiplied by distance, twelve inch pounds equal one foot pound. That means you divide inch pounds by twelve. If you need the reverse result, multiply foot pounds by twelve. The tool supports both directions, so you can check manuals, labels, and specifications without extra steps.
Advanced Options
Advanced options make the result easier to use. Precision controls how many decimal places are shown. Rounding modes help match shop standards. Standard rounding is best for most reports. Round up can be useful when a minimum torque must be exceeded. Round down can support conservative comparison work. A target value field compares your result with a required foot pound setting.
Batch Conversion and Export
Batch conversion saves time when you have many values. Paste numbers separated by commas, spaces, or new lines. The calculator converts every valid number and creates a clean table. You can then download a CSV file for spreadsheets. You can also export a simple PDF report for records, invoices, notes, or job sheets.
Practical Use
Use this calculator when reading torque wrench charts, small engine manuals, bicycle guides, appliance documents, or assembly instructions. It is also helpful for education. Students can see the formula, units, rounding, and examples together. Always follow the official equipment specification. Use calibrated tools for critical work. Recheck unusual values before applying force. Torque conversions are simple, but the final setting matters. Clean units help protect fasteners, threads, seals, bearings, and assemblies during daily repair work.
Example Checks
The example table shows common conversions. It gives quick reference points for checking your own entries. For example, sixty inch pounds equals five foot pounds. One hundred twenty inch pounds equals ten foot pounds. These simple anchors make it easier to spot typing mistakes before you save or share the report. during careful torque setup and review.
FAQs
1. What is an inch pound?
An inch pound is a torque unit. It means one pound of force applied at a one inch distance from a pivot point.
2. How many inch pounds equal one foot pound?
Twelve inch pounds equal one foot pound because one foot contains twelve inches.
3. How do I convert inch pounds to foot pounds?
Divide the inch pound value by twelve. For example, 120 inch pounds divided by 12 equals 10 foot pounds.
4. Can this calculator convert foot pounds back to inch pounds?
Yes. Select the reverse direction. The calculator multiplies foot pounds by twelve to get inch pounds.
5. Which rounding mode should I choose?
Use standard rounding for normal work. Use round up or round down only when your shop rule or report requires it.
6. What is batch conversion?
Batch conversion lets you paste many values at once. The calculator converts each valid number and displays a table.
7. Is inch pound the same as pound-inch?
Yes, both often describe the same torque unit. Always check the manual notation before applying a setting.
8. Can I use converted torque values for critical tasks?
Use the conversion as a guide. For critical assemblies, follow official specifications and use calibrated torque tools.